Vess R2000 SERIES, Руководство по эксплуатации продукта

Страница: 222 / 705

195
Product Manual WebPAM PROe - System Configuration
p
repariNg a
d
isk
a
rray For
t
raNsport
This feature prepares the physical drives that make up the disk array to be removed from the enclosure and
installed in a different location.
To prepare a disk array for transport:
1. Click the Storage tab.
2. Click the Disk Array icon.
The list of disk arrays appears.
3. Click the disk array you want, then click the Transport button.
4. Click the Confirm button.
The status changes to Transport Ready .
5. Remove the physical drives and install them in their new location.
For more information, see “Installing Physical Drives” on page 34.
r
ebuildiNg a
d
isk
a
rray
When you rebuild a disk array, you are actually rebuilding the data on one physical drive.
If there is no spare drive of adequate capacity and the Auto Rebuild function is
DISAB
LED, you must replace
the failed drive with an unconfigured physical drive, then perform a Manual Rebuild. See “Making Rebuild
Settings” on page 152.
Important
If your replacement disk drive was formerly part of a different disk array or
logical drive, you must clear the configuration data on the replacement drive
before you use it. See “Clearing a Stale or a PFA Condition” on page 186.