Vess R2000 SERIES, Руководство по эксплуатации продукта

Страница: 219 / 705

192
Vess R2000 Series Product Manual Promise Technologies
M
akiNg
d
isk
a
rray
s
ettiNgs
To make disk array settings:
1. Click the Storage tab.
2. Click the Disk Array icon.
The list of disk arrays appears.
3. Click the disk array you want, then click the Settings button.
4. Make settings changes as required:
• Enter, change or delete the alias in the Alias field
Maximum of 32 characters; letters, numbers, space between characters, and underline.
• Media Patrol – Check to enable, uncheck to disable on this array.
• PDM – Check to enable, uncheck to disable on this array.
• Power Management – Check to enable, uncheck to disable on this array.
5. Click the Save button.
Notes
You can also enable or disable Media Patrol for the entire RAID
system. See “Making Media Patrol Settings” on page 149.
HDD Power Saving must be enabled on the RAID controller for the
Power Management settings to be effective. See “Making Controller
Settings” on page 113.
Power Management functions are limited to the features your HDDs
actually support.