Vesper AIS WatchMate 850 страница 51 Скачать руководство пользователя | Manualshive

Страница: 51 / 62

background image

- 51 -

Metric or imperial

Select the units (metres or feet) to use for displaying target
dimensions.

Button sound

Enable or disable a brief sound whenever a button is pressed.

AIS Transceiver

Silent Mode

Enable or disable the AIS transmitter. This feature may be used in
situations where you do not wish to transmit your vessel data.

Your vessel AIS
details

Configure your vessel details for transmission to other vessels via AIS.
The

AIS

WatchMate

will not transmit until you have configured your

vessel details. See the

Configuration

section for more details.

I/O Port Settings

NMEA input

Select the type of device connected to supply input on this port.
Choose from NMEA 4800 baud or NMEA 38400 baud.

NMEA output

Select the type of data to output on this port. Choose from NMEA-only
at 4800 baud, AIS-only and NMEA+AIS at 38400 baud.

Note:

All data

input on the NMEA input port is “repeated” on the NMEA

output port, regardless of this setting. This allows you to use the

AIS

WatchMate

to combine NMEA instrument data and the internally-

generated AIS and GPS data into a single combined output stream.

Note:

These settings apply only to the NMEA input and output ports.

They do not apply to the USB port. The USB port always operates at
38400 baud and outputs all available data.

Additional Settings

Reset all settings

Resets all settings to the original factory values. Any settings you have
changed will be reset and you will lose any changes you have made.

When you select this setting a warning is displayed. To continue and
reset all settings, choose “

Yes

” to “Are you sure?” and press “

OK

”.

When you answer “

Yes

” or “

No

”, a message is briefly displayed

confirming your choice.

Settings Associated with Each Profile

The following settings are associated with a profile selection. Each profile (Harbor, Coastal,
Offshore, and Anchor) has it's own value for each of these settings. The setup screens
display the settings associated with the currently active profile. The name of the current
profile is shown on the top line of the screen. Any changes to these settings affect the
current profile only.

Hint:

To change the settings for a profile you must activate the profile first. Do this from the

main menu on the situation display before entering setup mode.

«
...
49
50
51
52
53
...
»

Содержание AIS WatchMate 850































































Отзывы:

Нет отзывов

Похожие инструкции для AIS WatchMate 850

Бренд: Danelec Страницы: 67

Snozzer 10029134

Бренд: auna multimedia Страницы: 42

Бренд: Ocean Signal Страницы: 2

Бренд: Audiovox Страницы: 28

Бренд: Murphy Страницы: 20

REVERY R4 WFS-58

Бренд: Sangean Страницы: 87

Бренд: Furuno Страницы: 4

Бренд: Uniden Страницы: 23

Bearcat BC148XLT

Бренд: Uniden Страницы: 23

Бренд: LENCO Страницы: 91

CAS GPS Node II

Бренд: GE Страницы: 20

Бренд: Roberts Страницы: 20

Бренд: Hitachi Страницы: 92

ToughSystem 2.0 RADIO + CHARGER

Бренд: DeWalt Страницы: 26

Бренд: DeWalt Страницы: 36

Бренд: DeWalt Страницы: 12

T STAK CONNECT DWST1-81079-GB

Бренд: DeWalt Страницы: 146

Бренд: DeWalt Страницы: 152

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды