03_18
03_19
03_20
Braking system fluid top up (03_18, 03_19, 03_20)
Proceed as follows:
1
. Remove the rear-view mirrors.
2
. Undo the two screws «
A
».
3
. Undo the screw «
B
» and remove the front handlebar cover.
4
. Remove the reservoir cover «
C
» by loosening the two fixing screws «
D
» and refill
with the prescribed brake fluid type only and without exceeding the maximum level.
Under standard climatic conditions, replace fluid as indicated in the scheduled main-
tenance table. This operation must be carried out by trained technicians; take your
scooter to an
authorised Service Centre or Dealer.
WARNING
ONLY USE DOT 4 CLASS BRAKE FLUIDS. BRAKING CIRCUIT FLUIDS ARE
HIGHLY CORROSIVE. MAKE SURE THAT IT DOES NOT COME INTO CONTACT
WITH THE PAINTWORK
.
CAUTION
AVOID CONTACT OF BRAKE FLUID WITH EYES, SKIN, AND CLOTHING. IN
CASE OF CONTACT, RINSE WITH WATER. THE BRAKING CIRCUIT FLUID IS
HYGROSCOPIC, THAT IS, IT ABSORBS HUMIDITY FROM THE SURROUNDING
AIR. IF THE HUMIDITY IN THE BRAKING FLUID EXCEEDS A CERTAIN VALUE,
IT WILL LEAD TO INEFFICIENT BRAKING. NEVER USE BRAKING FLUID KEPT
IN CONTAINERS THAT HAVE ALREADY BEEN OPENED, OR PARTIALLY USED.
Recommended products
AGIP BRAKE 4
40
3 Maintenance
Содержание S 50 4T 4V
