Vescent SLICE-DHV, Быстрый старт

Страница: 9 / 20

2021/08/30 08:42 9/20 SLICE-DHV Dual-Channel High-Voltage Amplifier
Product Manuals - https://www.vescent.com/manuals/
Fig. 6: Back button Returns to previous screen. Changes will be lost if not accepted before using the
Back button.
Lock Button
Fig. 7: Lock button (shown in unlocked mode) Locks out further modification of operation parameters.
Touch to lock or unlock parameter entry. When in lock mode, it is still possible to toggle the ramp on
and off, but it will not be possible to turn on the high voltage, change the bias voltage, or edit other
operation parameters.
I/O Button
Fig. 8: I/O button Enters the screen for programming the front-panel I/O .
System Settings Button
Fig. 9: System settings button Enters screen for system operational settings (brightness, volume,
etc.).
Entering Values
In most instances, there are two methods for entering parameter values: the physical rotary knobs on
the front panel and the pop-up keypad on the touch screen. When using the knobs to change the
value of a parameter, changes take effect immediately. When using the keypad, changes do not take
effect until the Enter key is touched.
Rotary Knobs
If you touch an editable field for a brief moment, the border of the field will change from blue to
yellow and a cursor will appear under one of the digits of the parameter value ( figure 10 , CH 1 DC