PICKLEBALL
ASSEMBLY & PLAY INSTRUCTIONS for ITEM’S TG413, TG415, TG417
1
1
2
4
3
5
5
1
1
5
5
5
5
End Upright Assembly
Insert the #1 Leg Bases and #4 Center Frame poles into the
4 Way End Connector. Then insert the #2 End Upright pole.
Center Frame Assembly
Using the remaining #5 Center Frame Long poles, connect
the End Upright and Center Upright.
Net Assembly
With the frame fully assembled, slide the net over each upright.
Using the hook & loop connectors secure the net to the center frame.
This will prevent the net from sliding up.
If required, you can tighten the net by securing the hook & loop
material around the End Upright poles.
To disassemble the net, remove the net from the frame. Then depress
the push pins on each pole connector to remove.
Center Upright Assemble
Insert the #1 Leg Bases and #5 Center Frame Long poles into
the 5 Way Center Connector. Then insert the #3 Center Upright
pole.
To set up the game, follow the instructions below:
Components
1
2
3
4
Net
1 Pc
#1
Leg
Base
4 Pc
#6
Short Leg
Base
6 Pc
#2
End
Upright
2 Pc
#3
Center
Frame
Upright
1 Pc
4 Way End Connector
2 Pc
#5
Center
Frame
Long
6 Pc
5 Way End Connector
1 Pc
#4
Center
Frame
2 Pc
Paddle 4
Pcs
TG413 includes NET ONLY no paddles and balls.
Ball
3 Pcs
Make sure the push pins are engaged.
