
56
Using your Vertu phone
Vertu battery certification guidelines
For your safety, always use original Vertu batteries. To check that you are
getting an original Vertu battery, purchase it from a Vertu authorised
service centre or dealer, and inspect the holospot label using the following
steps:
1. When you look at the holospot on the label, you should see a Vertu
symbol and three characters, similar to those shown below.
2. In the background you should see the unique holospot serial
number.
Successful completion of these steps is not a total assurance of the
authenticity of the battery. If you cannot confirm authenticity, or if you have
any reason to believe that your Vertu battery with the holospot on the label
is not an authentic Vertu battery, you should refrain from using it and
contact Vertu Customer Service (page 34).
USB data cable
You can use the USB data cable to transfer data between your Vertu phone
and a compatible PC or a printer supporting PictBridge. You can also use
the USB data cable with Vertu PC Suite (page 52).
You can also charge the battery by connecting your Vertu phone to your
PC using a USB data cable.
Connect the Micro USB connector of the
data cable to your Vertu phone as shown.
Ensure that the connector is inserted
correctly, with the connector symbol
uppermost.
Connect the USB connector of the data
cable to a USB port of the PC.
Содержание Ascent RM-589V
Страница 1: ...Quick Guide...
Страница 2: ......