Vertu Ascent RM-589V, Быстрое руководство, Страница: 43 / 57

Using your Vertu phone 43
Precaution when formatting the internal memory card:
If necessary, you can use the following menu to format the internal memory
card:
>
Menu » Gallery » Options » Memory card optio... » Format media mem.
When the internal memory card is formatted, such user data as messages,
in addition to the map data (page 53) used by
World Maps (page 51) and
all media files in Gallery (page 46) which have been saved on the internal
memory card, are completely deleted.
Before formatting the internal memory card, be sure to create a backup
copy of all necessary data onto your PC, using the backup feature
(specifically, the Vertu Content Copier application) of the Vertu PC Suite
(page 52), which is available by connecting your Vertu phone to your PC.
Initialising your Vertu phone:
You can reset the settings and all of your personal data stored on the
phone memory to their default state using the following menu:
>
Menu » Settings » Workshop reset » Restore all
If this menu is selected, your Vertu phone is reset to the state in which it
was shipped from the factory, except that the files and data stored on the
internal memory card (other than messages) are retained.
Before resetting your phone, you can use either of the following features to
create a backup copy of necessary data:
>
Using the backup feature of your Vertu phone under Menu » Settings » Sync
and backup » Create backup .
>
Using the backup feature (Vertu Content Copier) of Vertu PC Suite (page 52).
Note that if you use the backup feature of your Vertu phone (under Menu »
Settings » Sync and backup » Create backup ), the resulting file is saved
to the Backup files folder on the internal memory card (specifically under
Menu » Gallery » Media folder). Be aware that this copy will also be
deleted should you format the internal memory card. If there is a possibility
of formatting the internal memory card, we recommend that you create a
backup copy of necessary data also to your PC, using the backup feature
of Vertu PC Suite.
Other useful features
Setting an alarm
Alarms can be set to ring at specific times. You can access the alarm
setting menu in either of the following ways:
>
From the Home screen, select Menu » Alarm clock .
>
If the default configuration has not been changed, press the [Joystick] key
(Right) from the Home screen, and then select
Alarm clock from the shortcut
list (page 30) that appears.
After the alarm menu appears, make the necessary settings such as alarm
time. At this time, you can also select
Options to set the snooze interval or
repeat function, or to cancel an alarm that has already been set.
When there is an alarm set, a bell icon appears on the Home screen. In
addition, when the Home screen clock type is
Analogue , a white marker
will be displayed on the clock face on the Home screen, indicating the time
of the currently set alarm.
When an alarm rings, to activate the snooze feature, select Snooze from
the Home screen, or else rotate the phone by either 180 or 360 degrees
while the alarm is ringing. To stop an alarm without activating the snooze
feature, select
Stop from the Home screen.
Tip: When an alarm starts ringing while you are using any feature or
application, or while a screen other than the Home screen is displayed,
you will need to press the [End] key until the Home screen appears to
snooze the alarm.
Note: If your Vertu phone is switched off, it will switch itself on at the
alarm time. Remember this if you are in a restricted area.
Related pages: About Home screen clock
→
"Clock display on the Home screen" (page 20)
→
"Changing the Home screen clock type" (page 26)