Vertiv XTE 801 Series, Описание и руководство по установке

Страница: 28 / 124

Vertiv
| XTE 802 Series Walk-In-Cabinet (WIC) Description & Installation Manual (631-205-434) | Rev. D
28
WIC Features and Options
Perspective Views
For illustrations of the WIC, refer to the following.
•
Refer to
Figure 9
and
Figure 10
for WIC perspective views with major features identified.
•
Refer to
Figure 11
for WIC wall detail views.
•
Refer to
Figure 12
for top view of WIC floor.
•
Refer to
Figure 13
for WIC AC conduit routing.
•
Refer to
Figure 14
for WIC DC wireway locations.
•
Refer to
Figure 15
for door intrusion switch and fold down laptop desk locations.
•
Refer to
Figure 16
for floor cable entry ports locations.
Construction
Welded galvanized steel construction with outstanding impact and corrosion resistance.
•
Interlocking steel panels construction.
•
Walls, floor and ceiling are made of 14 gauge steel.
•
Ceiling joists with 12 gauge steel.
•
Floor Load: 200 pounds per square foot minimum (uniform with full-support foundation).
•
Roof Live and Impact Load: 300 PSF (maximum).
•
Wind Speed: 180 mph.
Protection
Powder coat finish. Meets GR487 Telcordia mechanical and environmental standards for telecom cabinets.
•
Protects against rain, sleet, snow, splashing water and damage from external ice formation.
•
Optional exterior finishes including brick, stone and exposed aggregate are available upon request.
Mounting Base
Cable mounting base with 360 degree access to floor penetrations for easy conduit and cable entries into the
XTE 802 Series Walk-In-Cabinet (WIC). See
Figure 6
on page 25.
•
Fork lift tubes on front and back.
•
Base includes steel cover plates front and back to accommodate cabling.
Interior Finish
•
Walls: White-textured Melamine panels over 5/8" gypsum board (1-hour fire-rated).