Vertiv NetSure SCC, Руководство пользователя

Страница: 12 / 36

Vertiv
| NetSure™ SCC Controller User Manual (UM1M520HNA) | Rev. H
12
OPERATION
NOTE!
Refer to the Configuration Drawing (C-drawing) furnished with your system for a list of factory
default settings.
SNMP Access
Users can access the SCC Controller via SNMP through the Ethernet Port. It is beyond the scope of this
manual to describe SNMP interface operation. Refer to the SNMP MIB file for a further understanding of the
SNMP interface.
Operation of the SCC Controller requires a master upstream supervisory and control unit, such as the Avocent
UMG, connected to the system’s Ethernet port and utilizing an SNMP interface.
NOTE!
The rectifier and BBU modules will continue to operate if the SCC Controller fails. The rectifier
and BBU modules will work if the system is powered up without an SCC Controller; however, an SCC
Controller is required to get any monitoring/status information from the system. The application should
be designed with an SCC Controller.
SCC Controller Interaction with the RMS
Refer to the following tables.
Basic Data SCC Controller to/from the RMS
Table 1:
General Product Information
Get/Set Field
Get sysDescr – System Descriptor
Get sysObjectID – Object Identifier
Get/Set User-defined Identifier/Name
Get SCC Serial Number
Get
System Inventory (list of model number for each
rectifier and BBU)
Get sysUpTime
Get sysContact
Get sysName
Get sysLocation
Get sysServices