SAG582140600
System Application Guide
Revision E, November 15, 2018
Spec. No. 582140600 (Model 8100
DB
)
Page 30 of 67
Seismic Anchor Kit, P/N 545387
Features
♦
Provides four (4) relay rack seismic mounting anchors, P/N 216821200.
Restrictions
For use with List 01, List 03, List 07, List 09.
Ordering Notes
1)
Order seismic anchor kit P/N 545387 as required.
Transient Voltage Surge Suppressor (TVSS) Device
Features
♦
When properly grounded, the device(s) suppresses transient voltages that are above 60 VDC.
♦
Contains an indicator which lights when circuit has activated to suppress voltages.
♦
Plugs into distribution device mounting positions of a List 15, List 15A, List 25, and List 25A distribution panel.
Restrictions
To be used with distribution panels List 15, List 15A, List 25, and List 25A only.
All unparalleled distribution panels require a TVSS device, only one (1) TVSS device required per paralleled groups of
distribution panels.
Unless otherwise specified, install the TVSS device in the mounting position closest to the distribution panel’s input busbar.
Wire to be sized so that the maximum wire resistance is less than 0.550 milliohms.
Caution: The TVSS device occupies two mounting positions. Leave an additional empty mounting position between
the TVSS device and any overcurrent protective device.
Ordering Notes
1)
Order kit P/N 520401 (includes TVSS device P/N 122201 plus lug mounting hardware) as required. Customer to supply
grounding lead(s) with lugs to connect from TVSS device(s) into customer's grounding network.
Figure 6
