Mechanical Installation
15
Figure 2-13 Dimensions of Fixed Lifting Holes
Note 1: Prior to lifting, ensure that the lifting capacity of the lifting equipment is greater than the weight of the unit.
Note 2: There are two holes on the external mounting brackets of the accessories of the unit for fixing the ropes for
hoisting. The hoisting ropes must pass through the openings of the mounting brackets to prevent the ropes from sliding
during the hoisting process.
Note 3: It is strictly forbidden to install the sling rope on any part other than the hoisting hole of the unit chassis for
hoisting. When installing the spreader, it is necessary to prevent the surface of the unit from being scratched, and the
dangerous parts should be shielded and protected according to the site conditions.
Note 4: Prior to the lifting operation, set up an operation area with warning signs outside the operation surface, and
non-related personnel are prohibited from entering.
Note 5: The lifting of the unit is a dangerous operation, which must be handled by skilled technicians, and
non-professional operations are strictly prohibited.
