Vertiv Liebert iCOM DP400/500, Инструкция по установке и эксплуатации, Страница: 114 / 180

Content Description
Separator Separating line to place between content sections. You can adjust the thickness and orientation of the separator.
Dial Status dial. You can select the sensor readings displayed in the center of the status dial when you touch to scroll through the readings.
Setpoint
Readout
Displays the current reading of a connected sensor, for example: Return temperature at 72°F.
Setpoint Bar
Displays a bar graph for a selected setpoint with customizable empty and ful limits. For example, if a temperature setpoint bar is empty at
60°F and full at 80°F, and the reading is 70°, the graph will be filled half way.
Sensor Bar
For remote sensors only, functions the same as the setpoint bar, but only offers connected remote sensors, and displays the customer-
assigned name of the sensor next to the graph.
Shortcut
Shortcut opens panels directly instead of browsing through menus. You can select the destination of the shortcut, whether or not an icon
displays, and the size, label, and frame of the shortcut.
Alarms Alarms panel. You can select whether or not the information may be exported.
Event Log Event log panel. You can select whether or not the information may be exported.
Run Hours Run hours panel. Summary of the component run hours and limits.
EconoPhase
Diagram
EconoPhase operating diagram.
EconoPhase
Status
Compressor/Econophase status bar. Indicates the operating mode and the percentage at which the component is operating.
Table 12.1 Main User Display Content Options
12.2.4 Removing Content
You can easily remove content from the main display.
1. Touch , then .
2. Touch in the upper right corner of the display and just below the control header.
3. Touch an object to select it (highlighted green), then touch , see Figure 12.1 on the previous page.
12.3 Customizing Parameter and Field Labels
You can customize header labels for parameters in the menus and you can customize field names.
NOTE: You can export labels for back up or to use a text editor to customize the labels. See Exporting, Importing, and
Customizing Labels Using a Text Editor on page 108.
1. Before going to the customization panel, use the search box and on screen keyboard to find the label(s) that
you want to customize. Once you know where they are, you’ll be able to find them in the categories on the
Customize Labels panel.
2. Touch , then > Display Options > Custom Labels .
The CUSTOM LABELS panel opens. The labels are divided into “categories” that represent the names of
menus, sub-menus and screen panels.
Vertiv™ | Liebert® iCOM™ Installer/User Guide
106