Vertiv Liebert CRV 300 CW Скачать руководство пользователя страница 14

Страница: 14 / 48

3 - 11

Liebert CRV

Liebert CRV - PD - 265086 - 11.01.2018

3.2 Optional features

Air cooled models

SUPPLY AIR BAFFLE

A field adjustable, modular supply air baffle is located in the discharge air

stream. It can be quickly and easily reconfigured to redirect airflow. The angles of the vanes have been

optimized to effectively distribute air to heat generating equipment in a wide variety of applications.

CONDENSATE PUMP

It has a capacity of 50 l/h at 3.7 m head. A float signal is available for a remote

alarm. Please notice that at 4 m head the flowrate is 0.

HUMIDIFIER

A steam generating canister humidifier is factory-installed in the cooling unit and is oper

ated by the iCOM control system. It is complete with disposable cylinder, all supply and drain valves,

steam distributor and electronic controls. The need to change the canister is inticated on the iCOM

display, if available. The humidifier is designed to operate with water conductivity from 125-500 (50Hz)

microS/cm. System automatically fills and drains as well as maintains the required water level based on

conductivity. An air-gap within the humidifier assembly shall prevent backflow of the humidifier supply

water. The humidifier is removable from the rear of the cabinet.

ELECTRIC REHEAT

The electric reheat coils are low watt density, 304 stainless steel fin-tubular con

struction, protected by thermal safety switches and controlled in one stage.

INTELLISLOT UNITY CARD (IS-UNITY-DP)

Provides monitoring via SNMP, Modbus (RS485/IP),

BACnet (RS485/IP) and HTTP (Web) protocols

INTELLISLOT SITESCAN CARD (IS-485EXI)

Provides monitoring via Liebert SiteScan Web 4.0 Pro-

tocol

FILTER

The optional F5 class (following EN779) filters are two deep pleated 60 mm, located within the

cabinet and accessible from the rear of the unit. A filter clog alarm is included as an option.

ONE (1) EXTRA COMMON ALARM CONTACT

Provides the customer with a total of two sets of nor-

mally open (n/o) contacts for remote indication of unit alarms.

LIQUISTAT

SENSOR Is a solid state water sensor that has no moving parts and is hermetically sealed

to keep out dust and dirt. When the sensor detects the presence of moisture the alarm system is acti-

vated.

DUAL POWER SUPPLY

with an internal automatic transfer switch is available as an option. With this

option the unit can be connected to 2 separate power supplies where each power supply is able to com-

pletely feed the unit. In case of failure of the main supply the unit automatically switches to the second

power supply. This allows to have a complete power supply redundancy.

Chilled water models

CONDENSATE PUMP

It has a capacity of 50 l/h at 3.7 m head. A float signal is available for a remote

alarm. Please notice that at 4 m head the flowrate is 0.

HUMIDIFIER

A steam generating canister humidifier is factory-installed in the cooling unit and is oper

ated by the iCOM control system. It is complete with disposable cylinder, all supply and drain valves,

steam distributor and electronic controls. The need to change the canister is indicated on the iCOM

display, if available. The humidifier is designed to operate with water conductivity from 125-500 (50Hz)

micro S/cm. System automatically fills and drains as well as maintains the required water level based on

conductivity. An air-gap within the humidifier assembly shall prevent backflow of the humidifier supply

water. The humidifier is removable from the rear of the cabinet.

ELECTRIC REHEAT

The electric reheat coils are low watt density, 304 stainless steel fin---tubular

construction, protected by thermal safety switches and controlled in one stage.

2-WAY MODULATING VALVE

A 2-way modulating valve controls the chilled water flow passing through

the cooling coil. The iCOM control manages the valve actuator movement in order to provide the de-

sired amount of cooling for various entering water flow rates and temperatures. Cooling capacity is

regulated by closing-off the chilled water flow. The maximum differential pressure across the closed

valve is 175 kPa. Maximum system pressure is 1586 kPa.

SUPPLY AIR BAFFLE

A field adjustable, modular supply air baffle is located in the discharge air

stream. It can be quickly and easily reconfigured to redirect airflow. The angles of the vanes have been

optimized to effectively distribute air to heat generating equipment in a wide variety of applications.

INTELLISLOT UNITY CARD (IS-UNITY-DP)

Provides monitoring via SNMP, Modbus (RS485/IP),

BACnet (RS485/IP) and HTTP (Web) protocols.

INTELLISLOT SITESCAN CARD (IS-485EXI)

Provides monitoring via Liebert SiteScan Web 4.0 Pro-

tocol.

Содержание Liebert CRV 300 CW

















































Результаты поиска

Содержание Liebert CRV 300 CW

Отзывы:

Похожие инструкции для Liebert CRV 300 CW

Бренды по названию

Популярные бренды

Vertiv Liebert CRV 300 CW, Продуктовая документация

Результаты поиска

Содержание Liebert CRV 300 CW

Отзывы:

Похожие инструкции для Liebert CRV 300 CW

Бренды по названию

Популярные бренды