Vertiv™ eSure™ Power Extend Converter Mounting Bracket, Door, and Top Cover Kits Installation Manual
7
Figure 3 Installing Left Side Bracket – 23” Distribution Cabinet
[ ] 9.
Remove the two (2) screws and flat washers that secure the right side of the distribution panel to the cabinet. These will
not be reused. See Figure 4.
[ ] 10.
Orient the kit supplied right side mounting bracket as shown in Figure 4. Note that the bracket comes preassembled
with mounting hardware. Secure the bracket to the distribution panel (and cabinet) with the preassembled mounting
hardware. Torque hardware as indicated in Figure 4.
Kit Supplied
Left Mounting
Bracket
Torque to
31 in-lbs.
23-Inch Distribution Cabinet
1-Row Cabinet (shown, 2-row similar)
2-Row Cabinet (BOTTOM ROW Only )
Remove these
screws and
flat washers.
Components removed in
illustration for clarity only.
Installed View
