Vertiv APM 0250kMK16FN02000, Руководство пользователя

Страница: 18 / 192

F igu re 2.1 B lo ck diagram fo r wo rk in g prin ciple o f UP S sin gle m o du le
N o. D es crip tion N o. D es crip tion
1 Input 9 Rectifier input switch
2 Output 10 Rectifier
3 Bypass input 11 Inverter
4 Maintenance bypass switch 12 Inverter switch
5 Bypass input switch 13 Output switch
6 Static switch 14 UPS output
7 Maintenance bypass 15 Battery
8 Mains input 16 Battery charger
The UPS has its own battery charger and adopts advanced temperature compensation technology to effectively prolong
the battery service life. The inverter adopts three level T-type IGBT topology and uses advanced SVPWM control
technology to derive the stable AC voltage from the DC bus voltage.
When the mains is normal, the rectifier and inverter work together to supply the loads and charge the battery.
When the mains is abnormal, the rectifier stops working, and the battery supplies power to the loads through the inverter. If
the battery voltage falls to end of discharge (EOD) voltage and the mains still has not been recovered, the UPS will shut
down (if the system uses split bypass configuration and the bypass is normal, the system will transfer to bypass). The
battery EOD voltage is preset. When the mains is abnormal, the battery maintains the UPS operation till the battery voltage
is reduced to EOD voltage and the UPS shuts down, this time is called 'Backup Time'. The length of backup time depends
on the battery capacity and the loads.
2 Overview
10
Vertiv™ Liebert® APM Plus User Manual