Vertical WAVE IP 2500 Скачать руководство пользователя страница 55

Страница: 55 / 236

Connecting the digital station module

Chapter 3: Setting Up the Wave IP 500 Server

Wave Server Installation Guide

Connecting the digital station module

Depending on the specific model, the digital station module provides 12 or 24 digital station
ports (see the

Wave Hardware Reference Guide

for details.) It is a partial-width module that can

be installed in any module slot.

See Appendix B for RJ-21X interface port descriptions and pinout pairs for the digital station
module.

To connect the digital station module:

Locate the RJ-21X port on the module.

Connect the RJ-21X cable from your punchdown block or patch panel to the port. (See
“Connecting an RJ-21X cable” on page 3-18.)

Connecting the external power supply for digital phones

You must use an external power supply to provide power to digital phones. See “External power
supply for digital phones” on page 3-6 for details.

To connect the external power supply:

Locate the power outlet on the back of the Wave IP 500.

Connect the power cord on the external power supply to the outlet.

Release 4.0

June 20, 2013

Содержание WAVE IP 2500













































































































































































































































Результаты поиска

Содержание WAVE IP 2500

Отзывы:

Vertical WAVE IP 2500, Руководство по установке, Страница: 55 / 236

Результаты поиска

Содержание WAVE IP 2500

Отзывы: