Vertical WAVE IP 2500, Руководство по установке

Страница: 152 / 236

Activating Wave licenses 8
-
10
Chapter 8: Entering and Activating Wave Licenses
Wave Server Installation Guide
The activation process
Activation consists of the following steps:
1. You submit your license information to Vertical using either of the methods described
below.
2. Vertical verifies the information. When you activate your licenses, the registration
information that you submit to Vertical is verified and saved for future troubleshooting
purposes. You have the opportunity to review the details of Vertical’s privacy statement
during the activation process detailed later in this chapter.
3. Activated licenses are returned to you and applied to your system.
One-click vs. offline activation
There are two ways to activate your Wave licenses:
•
One-click activation
. Use this method if the Wave Server has an Internet connection that
allows the use of the HTTPS protocol, and you have a valid DNS server. (See page 7-7
for more about configuring the Wave Server for one-click activation.) If you encounter
problems with one-click activation, you can try offline activation, or contact your Vertical
provider.
Note: If your Wave Server does not meet these requirements, you can still use one-click
activation if you set up a license activation proxy server. See page 8-17 for more
information.
One-click activation steps start on page 8-11.
•
Offline activation
. Use this method if the Wave Server does not have Internet access or
does not allow the use of the HTTPS protocol. With offline activation, you generate an
Offline Activation Request and submit it to the Vertical Activation Web site from another
PC. An Activation File is returned to you that you then manually activate on the Wave
Server.
Offline activation steps start on page 8-13.
Release 4.0 June 20, 2013