Vertical Comdial DX-80, Техническое руководство

Страница: 231 / 322

- 231 -
DX-80 Programming Manual
P
ROGRAMMING
U
NIFORM
C
ALL
D
ISTRIBUTION
(UCD) G
ROUPS
> S
ETTING
U
P
8.4 Setting Up UCD Voice Announce (VA) Groups
The DX-80 system provides UCD groups to allow you to handle high traffic using third-party ancillary RADs.
Whenever the overflow destinations of a UCD group require you to use more than one RAD to handle the volume
of call traffic, you can pool the RADs in a group (available UCD group) for access. If you do this, any of the
available devices can handle waiting calls with the same announcement.
The following conditions apply.
• You must assign all voice announce UCD group members to port type V.A.
• You must record all ancillary RAD devices individually for the same announcement.
These conditions do not apply when using the DX-80 VP system for UCD Overflow announcements.
8.4.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password .
2. Press show . The system displays the DB Item Select screen.
3. First, program the analog extension ports as type V.A.
4. Enter 01-nnn-21 , then press save (where “nnn” is the extension number of the analog port connected to an
ancillary RAD Device). This advances you to the selected extension Port Type field.
5. Press chg to select VA.
6. In the same manner, set other analog extensions connected to RAD devices to port type V.A. as needed.
7. Press he Volume button (up or down) to return to the DB Item Selection screen.
8. Program your UCD group as described in Section 8.3.1, Programming Using the DET . Be sure to program
the UCD group number you want to use as the V.A. group. Also be sure to assign V.A. in the Attribute field.
9. Finally, for the overflow destination fields, enter the V.A. UCD group number.
10. When you are finished, exit programming.
8.4.2 PROGRAMMING USING PC-DBA
1. Select Programming from the PC-DBA menu and press Enter . The system displays the Database Program-
ming menu.
2. First, program the analog extensions as port type V.A. Highlight Extension , and press Enter . The system
displays the Extension menu.
3. Highlight Category 2 and press Enter . The system displays the Extension—Category 2 menu.