Vertical Comdial DX-80, Техническое руководство

Страница: 191 / 322

- 191 -
DX-80 Programming Manual
P
ROGRAMMING
C
ALL
H
ANDLING
> S
ETTING
U
P
SMDR C
ALL
O
UTPUT
3. First, program the SMDR Call Output – Outgoing Call. Press chg to choose if you want to record SMDR
for outgoing calls. Valid choices are Y or N . The default is Y.
4. Enter 03-30-01 , then press save . This advances you to the SMDR Output selection for Outgoing Calls.
5. Press the Volume button (up or down) to return to the DB Item Select screen.
6. Next, program the SMDR Call Output – Incoming Call. Enter 03-30-02 , then press save . This advances
you to the SMDR Output selection for Incoming Calls.
7. Press chg to choose if you want to record SMDR for incoming calls. Valid choices are Y or N . The default
is N.
8. Press the Hold button to exit this programming and return to the previous menu level or press the Volume
button (up or down) to return to the Database Item Select screen.
9. Next, program the SMDR Call Output – Account Code. Enter 03-30-03 , then press save . This advances
you to the SMDR Output for Account Codes.
10. Press chg to specify if you want the account code to appear in the SMDR field. Valid choices are Y or N .
The default is Y.
11. Press the Volume button (up or down) to return to the Database Item Select screen.
12. Next, program the (CIL) Call Information Log serial port baud rate (CIL X_RATE). Enter 04-16 , then press
save . This advances you to the SMDR CIL port transmission rate setting.
13. Press chg to set this baud rate. Valid options are 1200, 2400, 4800, 9600, and 19200. The default is 9600.
14. Press the Hold button to return to the previous menu level,
Or, press the Volume button (up or down) to return to the DB Item Selection screen,
Or, exit programming.
6.27.2 PROGRAMMING USING PC-DBA
1. Select Programming from the PC-DBA menu and press Enter . The system displays the Database Program-
ming menu.
2. First, program call logging conditions (outgoing/incoming/account code). Highlight Call Handling and
press Enter . The system displays the Call Handling menu.
3. Highlight Category 2 and press Enter . The system displays the Call Handling—Category 2 menu.