Vertical Comdial DX-80, Техническое руководство, Страница: 132 / 322

P
ROGRAMMING
CO L
INES
> S
ETTING
U
P THE
PBX C
ODE AND
H
UNT
M
ETHOD
DX-80 Programming Manual
- 132 -
5. Key in the directory number you want the system to forward no answer calls to for this CO line, then press
Enter . Valid directory numbers are as follows.
• extensions 101-156,
• UCD numbers 410-433, or
• virtual number 700-729.
The default is extension 101.
6. In the same manner, assign predefined call forward no answer directory numbers to other CO lines as
needed.
7. When you are done, press Esc to return to the Database Programming screen. The system prompts: “Exit
This Feature?”; press Y for yes.
8. The system prompts “Save Current Setting?” Press Y to save your changes.
9. The system then prompts “File Exists, Override?” Press Y to continue with the save operation.
10. Press Esc to return to the Database Programming menu.
11. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send .
5.13 Setting Up the PBX Code and Hunt Method
You can install the DX-80 system as a subordinate of a host PBX. In this case, users access PBX facilities using a
DX-80 CO line button. To make a PBX call (PBX extension numbers and trunks) the user accesses the PBX port
using the CO line button and dials the appropriate PBX code.
You can also program the DX-80 to recognize the code used to access PBX trunks on PBX type CO ports. This
code identifies the type of call being placed so that the system can process the call accordingly. When the system
recognizes the PBX code, it automatically conditions the call for redial features and applies the class of service
restrictions you have programmed for that user.