Vertical Comdial DX-80, Техническое руководство

Страница: 114 / 322

P
ROGRAMMING
CO L
INES
> A
SSIGNING THE
CO G
ROUP
DX-80 Programming Manual
- 114 -
5. Continue assigning tenant groups to CO lines in the same manner, until you have assigned all CO lines the
tenant groups you want them to use.
6. When you are done, press Esc to return to the Database Programming screen. The system prompts: “Exit
This Feature?”; press Y for yes.
7. The system then prompts “Save Current Setting?” Press Y to save your changes.
8. The system then prompts “File Exists, Override?” Press Y to continue with the save operation.
9. Press Esc to return to the Database Programming menu.
10. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send .
5.3 Assigning the CO Group
The system provides eight CO line groups that you can assign to specific CO lines. The CO line group assignment
is used for CO line pool access.
The CO line groups are, by default, designated by three-digit notation when programmed on DET programmable
feature buttons. The exception to this is CO line group 1, which is by default designated as a one-digit 9. You can
program CO line groups 2 through 8 by dialing 800 through 806.
5.3.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password.
2. Press show . The DB Item Select screen displays.
3. Program your extensions for CO Line Access. Enter 02-ccc-03 , where ccc is the CO line directory number
(740-755).
4. Press save . This advances you to CO line group for the CO line you specified.
5. Press chg until the CO line group you want to assign displays. Valid entries are 1 though 8. The default is
1.
6. Press the Volume button (up or down) to return to the DB Item Select screen and enter another CO line, or,
press the Hold button to select another CO line you want to program.
7. Press show .
8. Press next twice to advance to the CO line group programming for the CO line you specified.
9. When finished programming CO line groups, press the Volume button (up or down) to return to the DB Item
Select screen or exit programming.