Vertex T22.3, Руководство пользователя

Страница: 42 / 44

41
2015/2/25V1.0+V1.0
is ON. The set data for the maintenance reminder will be used as the warning target by the
system, once it is reached ,
“
This treadmill is due for scheduled service
” will show up every time
the machine is started. Please add silicon lubrication and come back to this page to zero the
data.

In this page, accumulated work out time and distance can be reviewed.
8.7. Wi-fi setting
Switch to on position, the system will detect available wi-fi connection. db means the signal
strength, the smaller the better (it is advised to be lower than 50db). Please choose the wi-fi
connection, enter password, press connect or Done, wait for connection. Once
“connected”
(red color)shows up, the connection is completed.
※
The electronic meter will memorize the wi-fi device which was connected before. In next
use, the automatic connection will be available provided that this wi-fi device is located
within 20 m so that it is not required to input the password. When there are two or more
wi-fi devices that are connected before in current environment, the last used device will
enjoy the preference.
※
If the fireproof wall of the wi-fi setting is opened, please close it, or the wi-fi setting cannot
be detected or the connection cannot be done. If there is any other problem, please
contact with the saler.
8.8. Power setting
The time for the start of energy-saving mode (ErP time)
：
the presetting time is 60 min, the
setting range is 0-480 minute.

This means, under standby mode, when nobody is operating the treadmill, the system
will switch off the power for both upper and lower controller. Press
“WAKE” on the
keyboard to wake up the treadmill.
PauseBack: the presetting time is 4 min, and setting range is 15-300 second,

This time means that at the condition of
“pause” during exercise, after certain period of
time without operation, the workout will be ended automatically and turn to the standby
mode.
8.9. Update for the software

APP UPDATE
：
Update for the APP software, please refer to the file about the update
for software for details.

Kernel UPDATE
：
Update for Android core firmware, please refer to the file about the
update for software for details.