9
www.versitron.com
RS-232 Connection
Camera Site
Using the VCA1100 data cable provided, plug the DB9 connector into the DB9 port on the FVT1100
transmitter. Connect the Yellow wire (232T) in the data cable from the FVT1100 transmitter to the RS-232 port
of the controlled unit (pan/tilt, zoom). The Purple wire (GND) is used for ground connection.
Control Site
Using the VCA1100 data cable provided, plug the DB9 connector into the DB9 port on the FVR1100 receiver.
Connect the Green wire (232R) in the data cable from the FVT1100 receiver to the RS-232 port of the
controlling unit (Keyboard Controller, Matrix, DVR). The Purple wire (GND) is used for ground connection.
INDICATOR LEDs
The stand-alone units have integral LEDs that are used to monitor the state of the unit. There is one video LED,
one power LED, and one data LED on each unit. One, labeled as “Power (or PWR)”, lights when operating
power is present. Another, labeled as “Video (or VID)”, lights when the video input/output signals are detected.
The other one, labeled as “TD or RD”, blinks at the rate of the operating data.
TRANSMITTER and RECEIVER
Power: ON: (Red) indicates that correct power has been applied
Transmitter
:
Video: OFF: Indicates no video detected on input BNC connector
(No Video present on input BNC)
ON: (Green) Indicates video detected on input BNC connector
(Video present on input BNC connector)
Data: OFF: Indicates no data detected on the transmit data cable
Blinking: (Blue) Indicates data transmitted at the rate of the operation data.
Receiver
:
Video: OFF: Indicates no video detected on output BNC connector
(No video present on output BNC)
ON: (Green) Indicates video detected on output BNC connector
(Video present on input BNC)
Data: OFF: Indicates no data detected on the receive data cable
Blinking: (Blue) Indicates data received at the rate of the operation data.