68
SG71070M
Revision A3
2-13.4 Port Scheduler
This section provides an overview of QoS Egress Port Shapers for all switch ports, such as
getting detailed information for the ports belonging to the currently selected stack unit, as
reflected by the page header.
Web Interface
To display the QoS Egress Port Scheduler in the web interface:
1.
Click Configuration, QoS, Port Scheduler.
2.
Display the QoS Egress Port Scheduler.
Figure 2-13.4: The QoS Egress Port Scheduler
Parameter description:
Port
The logical port for the settings contained in the same row. Click on the port number in
order to configure the shapers.
Shapers (Qn)
Shows "disabled" or actual queue shaper rate - e.g. "800 Mbps".
Scheduler Mode
Controls whether the scheduler mode is "Strict Priority", "WRR" or “DWRR” on this switch
port.
Queue Shaper Enable
Controls whether the queue shaper is enabled for this queue on this switch port.
Queue Shaper Unit
Controls the unit of measure for the port shaper rate as "kbps" or "Mbps".
Queue Scheduler Weight
Controls the weight for this queue. The default value is "17". This value is restricted to 1-100.