Versitron Web Smart+ SG71070M Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 123

Versitron Web Smart+ SG71070M Скачать руководство пользователя страница 64

58

SG71070M

Revision A3

2-12 VCL

2-12.1 MAC-based VLAN

MAC address-based VLAN decides the VLAN for forwarding an untagged frame based on the
source MAC address of the frame.

A  most  common  way  of  grouping  VLAN  members  is  by  port,  hence  the  name  port-based
VLAN. Typically, the device adds the same  VLAN tag to untagged packets that are received
through  the  same  port.  Later  on,  these  packets  can  be  forwarded  in  the  same  VLAN.
Port-based VLAN is easy to configure, and applies to networks where the locations of terminal
devices are relatively fixed. As mobile office and wireless network access gain more popularity,
the ports that terminal devices use to access the networks are very often non-fixed. A device
may access a network through Port A this time, but through Port B the next time. If Port A and
Port B belong to different VLANS, the device will be assigned to a different VLAN the next time
it accesses the network. As a result, it will not be able to use the resources in the old VLAN. On
the other hand, if Port A and Port B belong to the same VLAN, after terminal devices access the
network through Port B, they will have access to the same resources as those accessing the
network through Port A do, which brings security issues. To provide user access and ensure
data security in the meantime, the MAC-based VLAN technology is developed.

MAC-based VLANS group VLAN members by MAC address. With MAC-based VLAN
configured, the device adds a VLAN tag to an untagged frame according to its source MAC
address. MAC-based VLANS are mostly used in conjunction with security technologies such as
802.1X to provide secure, flexible network access for terminal devices.

Web Interface

To configure MAC address-based VLAN configuration in the web interface:

1.      Click VLC, MAC-based VLAN configuration and add new entry.
2.      Specify the MAC address and VLAN ID.
3.      Click Apply.

Figure 2-12.1: The MAC-based VLAN Membership Configuration

Parameter description:



Delete

To delete a MAC-based VLAN entry, check this box and press save. The entry will be deleted
on the selected switch in the stack.



MAC Address

Indicates the MAC address.



VLAN ID

Indicates the VLAN ID.

«
...
62
63
64
65
66
...
»

Содержание Web Smart+ SG71070M




























































































































Отзывы:

Нет отзывов