ADJUST THE DIRECTION & OPEN/CLOSE CAP
INSTALLATION
1. Please study the instruction manual before your applications and
keep it for your future reference.
2. Do not flash LED light directly on the eyes when LEDs are on.
3. Do not install the camera on a unstable surface. It will cause falling
or other hazards.
4. Do not use improper power, it could cause fire or electric shock.
(Use the AC adaptor 12V DC regulated, 2A.
Dual voltage product can use 24V AC adaptor.(option))
5. Do not disassemble or re-model the camera, it could cause fire,
electric shock or other hazards.
6. Stop using the camera when you find a malfunction like smoke or
unusual heat, it could cause fire or electric shock.
7. Due to the possibility of water leakage, do not cut or peel off the cable.
In case you cutor peel off the cable, the warranty will be void.
8. Do not adhere dangerous articles to the camera.
9. Do not leave the unit along with an unstable stand or table.
10. DC power cable or video cable should be always loose.
Do not keep the cables tight or twisted.
11. Please use the camera unit within given temperature and electricity
limit.
12. Please make sure that installation should be done by qualified
service person only.
13. Do not disassemble the unit by yourself. When there is problem
with the unit please contact after-sale service center or the shop
where you bought.
ACCESSORIES
IR WATERPROOF D&N CAMERA
MANUAL
1. Long visible range at night.(70m Max. indoors, 60m Max. outdoors)
2. You can select the level ofLED ON/OFF and filter change according
to Lux as follow.
- Default Setting LED ON : Approx.5Lux,LED OFF :
10Lux
3. This camera adopts split glass technology to prevent IR light reflection.
4. This camera has vari-focal IR lens to prevent defocusing under IR
lighting.
5. Day & Night Function(ICR) at night to receive maximum available light.
6. This product can match for any circumstances very well.
7. This product is suitable for 24 hours survillance with optical multi-
coating filter according to IR LED and CCD.
8. This product is "waterproof" to resist rain, snow and other weather
factors.(IP67)
9. Sunvisor of this product can help the camera get the picture clearly.
10. This product is made of corrosion-free surface to resist rust and
corrosion for a long time.
11. RS-485 interface.(Pelco-D, Pelco-P protocol support)
12. Support 4 different privacy zone
13. DWDR(Digital Wide Dynamic Range)
14. Multi function : High Light Mask, Lens Shading Compensation, Impact
Detection,Motion Detection
15. Multi-language full OSD support
16. Power & video cables are concealable.(Cable through bracket)
17. This camera adopts 3-axis bracket to install on the ceiling and wall.
18. You can connect 24V AC or 12V DC regardless polarity.
19. This camera supports the advanced high resolution.
(700 TV- Line Color)
20. You can adjust the level of IR LED according to the circumstances.
IR LED output level controllable via RS-485.
21. A heater enables the camera to keep the proper operation at low
temperature.(ON : 23
℃
, OFF : 28
℃
)
22. A fan enables the camera to keep the proper operation when the
LED is ON.
Approx.
(Dual power version only)
FEATURE
CAUTION
If the product is to be put out of operation definitively,
take it to a local recycling plant for a disposal which
is not harmful to the environment.
ANCHOR 8x35 4EA
WRENCH 5mm L TYPE 1EA
BOLT 1/4"-20UNC L=6, 1EA
SCREW 6x35 TP1PAN SUS 4EA
<Ceiling mount>
<Wall mount>
WRENCH 5mm
Wall
Unlock
Lock
DIRECTION ADJUSTMENT
If you need function setting,
open and close the cap
by using the wrench.
Wall
SCREW Tp16x35 4EA
ANCHOR 8x35 4EA
63
Ø 30
Ceiling
SCREW Tp16x35 4EA
ANCHOR 8x35 4EA
Ø 30
※
After mounting the camera on a wall or ceiling
1. Loosen a bolt by using the wrench included.
2. Face the direction ofthe camera to monitor.
3. Tighten a bolt to complete adjustment.
BAR70-M855
