VersaLogic VL-EPU-4460, Справочник по аппаратуре

Страница: 59 / 63

Thermal Considerations
VL-EPU-4460 Reference Manual 59
Test Scenario 3: Dual Core EPU-4460-EDP + HDW-416 Heat Sink, with/without HDW-415
Fan
Figure 29. EPU-4460-ECP Dual Core Temperature Relative to Ambient Temperature
Installing VersaLogic Thermal Solutions
The following thermal solution accessories are available from VersaLogic:

VL-HDW-401 Thermal Compound Paste – used to mount the heat sink to the heat plate

VL-HDW-416 Passive Heat Sink – mounts to standard product.

VL-HDW-415 Fan Assembly – Cooling fan for the HDW-416 passive heatsink. Operates at
+12 V and includes an EPU-4460 compatible connector

VL-HDW-408 Heat Pipe Block – mounts to heat plate
Hardware Assembly
There are two basic assembly methods:

Heat plate down (in relation to the enclosure)

Heat plate up
These assembly methods are shown in Figure 30 and Figure 31respectively.
Heat Plate Down
The next figure (a representative image of a similar VersaLogic product) shows the assembly.
Use this assembly method if you are attaching the Condor to a larger thermal solution such as a
metal chassis/enclosure.