3. Loop the end of the strap back through the loop, fully securing the small strap around each anchor point.
Re-connect the end straps to the rest of the lanyard on each side.
4. Your lanyard is now properly secured to your LabQuest 3 unit. Place the neck strap around your neck and
adjust the length straps, if necessary.
For more information about the LabQuest 3 Lanyard, see
www.vernier.com/lq3-lan
Vernier Software & Technology
13979 S. W. Millikan Way
Beaverton, OR 97005-2886
Toll Free (888) 837-6437
(503) 277-2299
FAX (503) 277-2440
www.vernier.com
Rev. 9/10/2020
Vernier LabQuest and other marks shown are our trademarks or registered trademarks in the United States.
All other marks not owned by us that appear herein are the property of their respective owners, who may or may not be affiliated with, connected to, or sponsored by us.
