Go Direct
®
Sensor Cart Charge Station
Order Code GDX-CART-CRG
The Go Direct Charge Station is used to charge Go Direct Sensor Carts (not included).
For additional product information, visit
www.vernier.com/gdx-cart-crg
What’s Included
4-slot Charge Station
Charge Station Cable
Using the Product
Perform the following steps to charge your Go Direct Sensor Carts in the charge station:
1.
Connect the power cable to the charge station and to an outlet.
2.
Place the Go Direct Sensor Cart in the slot so that its USB power port is easily accessible.
3.
Remove the charge station connector cord from its storage hole and attach the connector to the USB port on the Go Direct
Sensor Cart.
Sensor Cart Charging Indicator Lights
The LED next to the battery icon is orange while the sensor cart is charging.
The LED next to the battery icon is green when the sensor cart is fully charged.
Precautions and Operational Tips
You can charge Go Direct Sensor Carts for any amount of time, even for a few minutes between classes.
The charge station is not water resistant and should not be exposed to a wet environment.
Go Direct Sensor Carts can be stored in the charger with the charge station connected to AC. Go Direct Sensor Cart batteries cannot
be overcharged.
When not using a charging slot, place the connector cord in the storage hole. This protects the cord from damage.
Troubleshooting
Try these troubleshooting tips if your charge station is not properly charging your Go Direct Sensor Carts.
Verify the wall outlet is providing power.
Verify the Charge Station Cable is connected to the charge station base.
If one port is not working, try other ports.
If the charging LED does not come on, try charging the cart with the USB cable that came with the Go Direct Sensor Cart to verify
the LED comes on using the USB cable.
Repair Information
If you have followed the troubleshooting steps and are still having trouble with your Go Direct Sensor Cart Charge Station, contact
Vernier Technical Support at
or call 888-837-6437. Support specialists will work with you to determine if the unit
needs to be sent in for repair. At that time, a Return Merchandise Authorization (RMA) number will be issued and instructions will be
communicated on how to return the unit for repair.
Accessories/Replacements
Replacement Parts
Order Code
Charge Station Cable
CRG-CB
Charge Station Cable Euro
CRG-CB-EURO
Disposal Instruction
When disposing of this electronic product, do not treat it as household waste. Its disposal is subject to regulations that vary by country and
region. This item should be given to an applicable collection point for the recycling of electrical and electronic equipment. By ensuring
that this product is disposed of correctly, you help prevent potential negative consequences on human health or on the environment. The
recycling of materials will help to conserve natural resources. For more detail information about recycling this product, contact your local
city office or your disposal service.
The symbol, show here, indicates that this product must not be disposed of in a standard waste container.
Warranty
Vernier warrants this product to be free from defects in materials and workmanship for a period of five years from the date of shipment to
the customer. This warranty does not cover damage to the product caused by abuse or improper use.
