background image

23

WinterWarm Small Insert

2000888

Warranty 

Limited 3 Year Warranty

CFM Corporation warrants that this woodburning stove will be free 

of defects in material and workmanship for a period of three years 

from the date you receive it, except that the catalyst, thermostat 

assembly, handles, glass door panels, cement, and gasketing shall 

be warranted as described below.

CFM Corporation will repair or replace, at its option, any part 

found to be defective upon inspection by a CFM Corporation, Autho-
rized  Dealer.  The customer must return the defective part or the stove, 
with shipping prepaid, to the Authorized Dealer or pay for any Autho-
rized Dealer in-home travel fees or service charges for in-home repair 
work.  It is the dealer’s option whether the repair work will be done in 
the customer’s home or in the dealer’s shop. If, upon inspection, the 
damage is found to be the fault of the manufacturer, repairs will be 
authorized at no charge to the customer for parts and/or labor.

Any woodburning stove or part thereof that is repaired or re-

placed during the limited warranty period will be warranted under the 
terms of the limited warranty for a period not to exceed the remaining 
term of the original limited warranty or six (6) months, whichever is 
longer.

Limited 1 Year Warranty

The following parts of the woodburning stove are warranted to be free 
of defects in material and workmanship for a period of one year from 
the date you receive it:  The thermostat assembly, handles, glass door 
panels, cement, and gasketing.  Any of these items found to be defec-
tive will be repaired or replaced at no charge, upon the return of the part 
with postage prepaid to a CFM Corporation Authorized Dealer.

Any part repaired or replaced during the limited warranty period 

will be warranted under the terms of the limited warranty for a period not 
to exceed the remaining term of the original limited warranty or six (6) 
months, whichever is longer.

Limited Catalyst Warranty

The catalyst will be warranted for a six year period as follows:  If the 
original catalyst or a replacement catalyst proves defective or ceases to 
maintain 70% of its particulate emission reduction activity (as measured 
by an approved testing procedure) within 24 months from the date the 
stove is received, the catalyst itself will be replaced free.  

From 25 - 72 months a pro-rated credit will be allowed against a 

replacement catalyst and the cost of labor necessary for its installation 
at the time of replacement.

For stove purchases made after June 30, 1990, a third year  

(25 - 36 months) of no charge replacement will be made when combus-
tor failure is due to thermal degradation of the substrate (crumbling of 
ceramic material).  The customer must pay for any in-home travel fees, 
service charges, or transportation costs for returning the stove to the 
Authorized Dealer.
 

Amount of Time 

Credit Towards 

 

Since Purchase 

Replacement Cost

 

0 - 24 months 

100%

 

25 - 36 months 

  50 %

 

37 - 48 months 

  30%

 

49 - 60 months 

  20%

 

61 - 72 months 

  10%

Any replacement catalyst will be warranted under the terms of the 
catalyst warranty for the remaining term of the original warranty.  The 
purchaser must provide the following information in order to receive a 
replacement catalyst under the terms of this limited warranty:

1. Name, address and telephone number.
2. Proof of original purchase date.
3. Date of failure of catalyst.
4. Any relevant information or circumstances regarding determi-

nation of failure.

5. In addition, the owner must return the failed catalyst.

Exclusions & Limitations

1. This warranty is transferable; however, proof of original retail 

purchase is required.

2. This warranty does not cover misuse of the stove.  Misuse 

includes overfiring which will result if the stove is used in such a manner 
as to cause one or more of the plates to glow red.  Overfiring can be 
identified later by warped plates and areas where the paint pigment has 
burned off.  Overfiring in enamel fireplaces is identified by bubbling, 
cracking, chipping and discoloration of the porcelain enamel finish.  
CFM Corporation offers no warranty on chipping of enamel surfaces. 
Inspect your woodburning stove prior to accepting it for any damage to 
the enamel.

3. This warranty does not cover misuse of the stove as described in 

the Owner’s Guide, nor does it cover an stove which has been modified 
unless authorized by a CFM Corporation representative in writing.  This 
warranty does not cover damage to the stove caused by burning salt 
saturated wood, chemically treated wood, or any fuel not recommended 
in the Owner’s Guide.

4. This warranty does not cover a stove repaired by someone other 

than a CFM Corporation Authorized Dealer.

5. Damage to the unit while in transit is not covered by this warranty 

but is subject to a claim against the common carrier.  Contact Vermont 
Castings Authorized Dealer from whom you purchased your stove or 
CFM Corporation if the purchase was direct.  (Do not operate the stove 
as this may negate the ability to process the claim with the carrier.)

6. Claims are not valid where the installation does not conform to lo-

cal building and fire codes or, in their absence, to the recommendations 
in our Owner’s Guide.

7. The salt air environment of coastal areas, or a high-humidity 

environment, can be corrosive to the porcelain enamel finish. These 
conditions can cause rusting of the  cast iron beneath the porcelain 
enamel finish, which will cause the porcelain enamel finish to flake off. 
This warranty does not cover damage caused by a salt air or high-hu-
midity environment. 

8. CFM Corporation shall have no obligation to enhance or update 

any unit once manufactured.

IN NO EVENT SHALL CFM CORPORATION BE LIABLE FOR 

INCIDENTAL AND CONSEQUENTIAL DAMAGES. ALL IMPLIED 
WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MER-
CHANTABILITY AND FITNESS, ARE LIMITED TO THE DURATION OF 
THIS WRITTEN WARRANTY. THIS WARRANTY SUPERCEDES ALL 
OTHER ORAL OR WRITTEN WARRANTIES.

Some states do not allow the exclusion or limitations of inciden-

tial and consequential damages or limitations on how long an implied 
warranty lasts, so the above limitations may not apply to you. This war-
ranty gives you specific rights and you may have other rights which vary 
from state to state.

How to Obtain Service

If a defect is noted within the warranty period, the customer should 
contact a Vermont Castings Authorized Dealer or CFM Corporation if 
the purchase was direct with the following information:

1.  Name, address, and telephone number of the purchaser.
2.  Date of purchase.
3.  Serial number from the label on the back.
4.  Nature of the defect or damage.
5.  Any relevant information or circumstances, e.g., installation, 

mode of operation when defect was noted.
A warranty claim will then start in process.  CFM Corporation reserves 
the right to withhold final approval of a warranty claim pending a visual 
inspection of the defect by authorized representatives.

Содержание WinterWarm Small Insert 2080

























Отзывы: