30006361 3/13 Rev. 2 EN
VCT223SSP Assembly Procedures
Tools Required:
Knife or scissors, #2 & #3 Phillips screwdriver, 7/16” & 11/32” wrench or ratchet. Refer to
the parts list for hardware details. The use of a manual screwdriver is strongly recommended. A power drill
may cause damage to the unit or stripping of the protective coating.
CAUTION: This grill is intended ONLY to be used as a cart model, this grill cannot be built into an
enclosure.
CAUTION: The assembly of this grill requires two (2) people.
CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting
or moving the grill is recommended. Protective eyewear and long sleeves are also strongly recom-
mended.
NOTE:
Remove the protective plastic coating from the stainless steel, failure to do so will void the warranty.
6361
VCT223SSP cover
