Vermont Castings Resolution VHLDV500 страница 55 Скачать руководство пользователя

Страница: 55 / 56

20300293

Resolution Direct Vent Gas Fireplace

LIMIteD LIFetIMe waRRanty pOLIcy

LIFetIMe waRRanty

The following components are warranted for life to the original owner, subject to proof of purchase:

Firebox, Combustion Chamber, Heat Exchanger, Grate and Stainless Steel Burners.

FIVe yeaR waRRanty

The following components are warranted five (5) years to the original owner, subject of proof of purchase:

Ceramic Fiber Logs.

BasIc waRRanty

MHSC warrants the components and materials in your gas appliance to be free from manufacturing and

material defects for a period of two years from date of installation. After installation, if any of the compo-

nents manufactured by MHSC in the appliance are found to be defective in materials or workmanship,

MHSC will, at its option, replace or repair the defective components at no charge to the original owner.

MHSC will also pay for reasonable labor costs incurred in replacing or repairing such components for

a period of two years from date of installation. Any products presented for warranty repair must be ac-

companied by a dated proof of purchase.
This Limited Lifetime Warranty will be void if the appliance in not installed by a qualified installer in ac-

cordance with the installation instructions. The Limited Lifetime Warranty will also be void if the appliance

is not operated and maintained according to the operating instructions supplied with the appliance, and

does not extend to (1) firebox/burner assembly damage by accident, neglect, misuse, abuse, alterations,

negligence of others, including the installation thereof by unqualified installers, (2) the costs of removal,

reinstallation or transportation of defective parts on the appliance, or (3) incidental or consequential

damage. All service work must be performed by an authorized service representative.
This warranty is expressly in lieu of other warranties, express or implied, including the warranty of mer-

chantability of fitness for purpose and of all other obligations or liabilities. MHSC does not assume for

it any other obligations or liabilities in connection with sale or use of the appliance. It states that do not

allow limitations on how long an implied warranty lasts, or do not allow exclusion of indirect damage,

those limitations of exclusions may not apply to you. You may also have additional rights not covered

in the Limited Lifetime Warranty.
MHSC reserves the right to investigate any and all the claims against the Limited Lifetime Warranty and

decide upon method of settlement.

IF waRRanty seRVIce Is neeDeD...

1. Contact your supplier. Make sure you have your warranty, your sales receipt and the model/serial

number of your MHSC product.

2. DO NOT ATTEMPT TO DO ANY SERVICE WORK YOURSELF.

Содержание Resolution VHLDV500

























































Результаты поиска

Содержание Resolution VHLDV500

Отзывы:

Похожие инструкции для Resolution VHLDV500

Бренды по названию

Популярные бренды

Vermont Castings Resolution VHLDV500, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Resolution VHLDV500

Отзывы:

Похожие инструкции для Resolution VHLDV500

Бренды по названию

Популярные бренды