Vermont Castings EWF30, Руководство по установке и эксплуатации для владельцев жилья

Страница: 3 / 32

3
Vermont Castings EWF30
20008662
Safety Information
Please Read This Manual Before Installing and Using Fireplace
IMPORTANT: Read all instructions and warnings carefully before starting installation. Failure to
follow these instructions may result in a possible fire hazard and will void the warranty.
Description
The EWF30 fireplace is a clean burning, non-catalytic,
EPA certified solid fuel, wood burning, heat circulating
fireplace.
Precautions
CFM Corporation fireplaces and component parts have
been highly tested and will operate safely when in-
stalled in accordance with instructions provided in this
manual. Carefully read and understand all instructions
before beginning installation.
If you notice any damage to fireplace or component
parts, immediately report damage to your CFM Corpo-
ration dealer.
Only use CFM Corporation components or the warranty
will be voided and a fire hazard may be created.
CFM Corporation warranty will be voided by and CFM
Corporation disclaims any responsibility for the follow-
ing actions:
•
Installation of any damaged fireplace or chim-
ney component;
•
Modification of fireplace, chimney assembly
or any component parts thereof;
(except for
chase flashings as detailed in CFM Corporation
Chimney Top installation instructions).
•
Installation other than as instructed by CFM
Corporation; or
•
Installation and/or use of any component part
not manufactured or approved by CFM Corpo-
ration in combination or assembly with a CFM
Corporation fireplace system, notwithstanding
any independent testing laboratory or other
third party approval of such component parts
or accessory.
Any such action may possibly cause a fire hazard.
Consult local building codes to ensure that you are in
compliance
before installing the fireplace.
This fireplace and chimney system must be vented to
the out-of-doors.
Do not obstruct or modify air inlets/outlets in any
manner.
Do not install combustible materials on any of the
black fireplace surround.
Burn only solid wood fuel.
The EWF30 is intended for operation with the doors
closed or fully open only with the optional spark
screen in place. The doors must be in the fully
closed position for clean burning operation.
Do not install a solid fuel burning insert or other
products not specified for use with this fireplace.
This fireplace is not approved for installation in
mobile homes.
NOTE: Hairline cracks in hearth brick and ash lips
are not a safety issue and do not need to be re-
placed.
Drafts
The fireplace should not be located in areas that create
drafts (ie: frequently opened doors and central heating
air inlets/outlets) that hamper the normal flow of air into
the fire.
EWF30
Listed
UL 127 / ULC-S610
Standard for Factory Built Fireplaces
Unit: WFE05H0