Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R7 • 2019 - ___ • 06/22
14
8390-204C
F. Opacity (Visible Smoke)
This is the measure of how cleanly your appliance is burning.
Opacity is measured in percent; 100% opacity is when
an object is totally obscured by the smoke column from a
chimney, and 0% opacity means that no smoke column can
be seen. As you become familiar with your appliance, you
should periodically check the opacity. This will allow you to
know how to burn as nearly smoke-free as possible (goal of
0% opacity).
When burning your first fire, you will experience smoke and
odor from the appliance resulting from the curing of paint
and burning off of any oils remaining from manufacturing.
OPEN WINDOWS DURING INITIAL BURN TO DISSIPATE
SMOKE AND ODORS!
•
O
dors may be irritating to sensitive individuals.
•
Smoke detectors may activate.
CAUTION
!
Fire Risk
•
DO NOT BURN GARBAGE OR FLAMMABLE
FLUIDS SUCH AS GASOLINE, NAPTHA OR
ENGINE OIL.
WARNING
!
•
Do NOT burn treated wood or wood with salt (driftwood).
•
May generate carbon monoxide if burn material other
than wood.
May result in illness or possible death.
Fire Risk
Keep combustible materials, gasoline and other
flammable vapors and liquids clear of appliance.
WARNING
!
• Combustible materials may ignite.
• Do NOT store flammable materials in the appliance’s
vicinity.
• DO NOT USE GASOLINE, LANTERN FUEL,
KEROSENE, CHARCOAL LIGHTER FLUID OR
SIMILAR LIQUIDS TO START OR “FRESHEN UP” A
FIRE IN THIS Appliance.
• Keep all such liquids well away from the appliance
while it is in use.
Negative pressure results from the imbalance of air available
for the appliance to operate properly. It can be strongest in
lower levels of the house.
Causes include:
• Exhaust fans (kitchen, bath, etc.)
• Range hoods
• Combustion air requirements for furnaces, water
appliances and other combustion appliances
• Clothes dryers
• Location of return-air vents to furnace or air conditioning
• Imbalances of the HVAC air handling system
• Upper level air leaks such as:
- Recessed lighting
- Attic hatch
- Duct leaks
To minimize the effects of negative air pressure:
• Install outside air to the stove with the intake facing
prevailing winds during the heating season
• Ensure adequate outdoor air for
all combustion appliances
and exhaust equipment
• Ensure furnace and air conditioning return vents are not
located in the immediate vicinity of the appliance
• Avoid installing the appliance near doors, walkways or
small isolated spaces
• Recessed lighting should be a “sealed can” design
• Attic hatches weather stripped or sealed
• Attic mounted duct work and air handler joints and seams
taped or sealed
G. Negative Pressure
Asphyxiation Risk
• Negative pressure can cause spillage of
combustion fumes, soot and carbon monoxide.
• Appliance needs to draft properly for safety.
WARNING
!
