4.
Rotate the damper crank forward and flip
the adjuster plate upside-down, (you will
see #950 cast into the plate)
(Fig. 6)
. Slide
the adjuster plate over to the left end of the
crank.
5.
Disconnect the old damper rod from the crank by
rotating both the crank and the adjuster as a unit in a
counter-clockwise direction (facing the left end of
the stove). As you rotate the crank and adjuster
plate through the high point of the arc, you will
need to maneuver the adjuster plate somewhat to
clear the back plate of the stove
(Fig. 7)
. Unscrew
the damper rod from the stove.
6.
Loosen the set screw with the Allen wrench to remove the faucet handle from the old rod and
re-install the handle on the new damper operating rod.
7.
Install the new operating rod. Place the 5/8” washer onto the rod between the outer and
inner walls
(Fig. 8)
, then insert the end of the rod into the crank. Properly oriented, both
the handle and the crank should be pointing downward.
Fig. 6
Fig. 7
Figure 8
Figure 9
WoodmansPartsPlus.com
