- 9 -
OPERATING INSTRUCTIONS
1.
MAIN ON/OFF SWITCH
The On/Off switch supplies power to all of the functions of
the fireplace. This is an illuminated switch which normally
will light up when in the "on" position.
The control compartment is located behind the lower louvre
panel, or access panel radiant. To access the controls,
simply flip down the lower louvre panel, or remove access
panel radiant by lifting up and pulling out. To locate the
position of each control described below, refer to Fig. 10.
During any service of this appliance, the
power to the unit must be turned off. It is
not acceptable to use the "On/Off" switch
to meet this requirement.
2.
HEATER CONTROL
The Heater Control acts to turn the heater on and off as well
as setting the comfort level in the room. Turning the knob
clockwise from the off position will place the heater into
operation. The further the knob is rotated clockwise, the
higher the set point temperature. Turning the knob
counterclockwise will lower the set point temperature.
Turning it all the way counterclockwise will turn the heater
function off.
3.
LOG ILLUMINATION CONTROL
This On/Off switch to control the light located above the log
set.
4.
FLAME SPEED CONTROL
Turn the flame speed control knob to increase or decrease
the flame speed as desired.
Fig. 10
CONTROL PANEL
2
3
4
1
RED
GOLD
GOLD
GOLD
Servicing.
details.
heater.
least 3 feet (0.9m) from the front of the
cords, draping, and other furnishings at
WARNING: Risk of fire, keep electrical
WARNING: Disconnect Power Before
See Installation Instructions for service
Voir les instructions d'installation pour
des details sur le service.
AVERTISSEMENT: Debrancher la source
d'alimentation avant le service.
AVERTISSEMENT: Risque d'incendie,
veiller a ce que les cordons electriques,
tentures et autres textiles domestiques
soient a au moins 3 pieds (0,9m) de
I'avant de I'appareil de chauffage.
10003324
