background image

Vermont Castings  •  Aspen C3 Owner’s Manual_R5  •  2019 - ___ •  11/19

5

8390-950c

4021-645J • 08-03-17

2

WARRANTY CONDITIONS:

•  This  warranty  only  covers  HHT  appliances  that  are  purchased  through  an  HHT  authorized  dealer  or  distributor.  A  list  of  HHT 

authorized dealers is available on the HHT branded websites.

•  This warranty is only valid while the HHT appliance remains at the site of original installation.
•  This warranty is only valid in the country in which the HHT authorized dealer or distributor that sold the appliance resides.
•  Contact your installing dealer for warranty service. If the installing dealer or distributor is unable to provide necessary parts, contact 

the nearest HHT authorized dealer or supplier. Additional service fees may apply if you are seeking warranty service from a dealer 

other than the dealer from whom you originally purchased the product. 

•  Check with your dealer in advance for any costs to you when arranging a warranty call. Travel and shipping charges for parts are not 

covered by this warranty.

•  Limited Catalyst Warranty

o  For wood burning products containing a catalyst, the catalyst will be warranted for a six-year period as follows: if the original 

catalyst or a replacement catalyst proves defective or ceases to maintain 70% of its particulate emission reduction activity (as 

measured by an approved testing procedure) within 36 months from the purchase date, the catalyst will be replaced for free.

o  From 37 to 72 months a pro-rated credit will be allowed against a replacement catalyst and labor credit necessary to install 

the replacement catalyst. The proration rate is as follows:

Amount of Time Since Purchase

Credit Towards Replacement Cost

0 - 36 Months

100%

37 - 48 Months

30%

49 - 60 Months

20%

61 - 72 Months

10%

o  Any replacement catalyst will be warranted under the terms of the catalyst warranty for the remaining term of the original 

warranty.  The  purchaser  must  provide  the  name,  address,  and  telephone  number  of  the  location  where  the  product  is 

installed, proof of original purchase date, date of failure, and any relevant information regarding the failure of the catalyst.

WARRANTY EXCLUSIONS:

This warranty does not cover the following:
•  Changes in surface finishes as a result of normal use. As a heating appliance, some changes in color of interior and exterior surface 

finishes may occur. This is not a flaw and is not covered under warranty.

•  Damage  to  printed,  plated,  or  enameled  surfaces  caused  by  fingerprints,  accidents,  misuse,  scratches,  melted  items,  or  other 

external sources and residues left on the plated surfaces from the use of abrasive cleaners or polishes.

•  Repair or replacement of parts that are subject to normal wear and tear during the warranty period are not covered. These parts 

include: paint, wood and pellet gaskets, firebricks, grates, flame guides, batteries and the discoloration of glass. 

•  Minor expansion, contraction, or movement of certain parts causing noise. These conditions are normal and complaints related to 

this noise are not covered by this warranty.

•  Damages resulting from: (1) failure to install, operate, or maintain the appliance in accordance with the installation instructions, 

operating  instructions,  and  listing  agent  identification  label  furnished  with  the  appliance;  (2)  failure  to  install  the  appliance  in 

accordance with local building codes; (3) shipping or improper handling; (4) improper operation, abuse, misuse, continued operation 

with damaged, corroded or failed components, accident, or improperly/incorrectly performed repairs (5) environmental conditions, 

inadequate ventilation, negative pressure, or drafting caused by tightly sealed constructions, insufficient make-up air supply, or 

handling devices such as exhaust fans or forced air furnaces or other such causes; (6) use of fuels other than those specified in 

the operation instructions; (7) installation or use of components not supplied with the appliance or any other components not 

expressly authorized and approved by HHT; (8) modification of the appliance not expressly authorized and approved by HHT in 

writing; and/or (9) interruptions or fluctuations of electrical power supply to the appliance.

•  Non-HHT venting components, hearth connections or other accessories used in conjunction with the appliance.
•  Any part of a pre-existing fireplace system in which an insert or a decorative gas appliance is installed.
•  HHT’s obligation under this warranty does not extend to the appliance’s capability to heat the desired space. Information is provided 

to assist the consumer and the dealer in selecting the proper appliance for the application. Consideration must be given to the 

appliance location and configuration, environmental conditions, insulation and air tightness of the structure.

Содержание Aspen C3

























Отзывы: