background image

27

Encore

®

 2040CE Non-Catalytic / Catalytic Wood Burning Stove

30005552

Warranty 

Limited 3 Year Warranty

Vermont Castings Group warrants that this wood burning stove will 
be free of defects in material and workmanship for a period of three 
years from the date you receive it, except that the catalyst, thermostat 
assembly, handles, glass door panels, cement, and gasketing shall 
be warranted as described below.

Vermont Castings Group will repair or replace, at its option, any part found 
to be defective upon inspection by a Vermont Castings, Authorized  Dealer.  
The customer must return the defective part or the stove, with shipping 
prepaid, to the Authorized Dealer or pay for any Authorized Dealer in-home 
travel fees or service charges for in-home repair work.  It is the dealer’s 
option whether the repair work will be done in the customer’s home or 
in the dealer’s shop. If, upon inspection, the damage is found to be the 
fault of the manufacturer, repairs will be authorized at no charge to the 
customer for parts and/or labor.
Any wood burning stove or part thereof that is repaired or replaced during 
the limited warranty period will be warranted under the terms of the limited 
warranty for a period not to exceed the remaining term of the original 
limited warranty or six (6) months, whichever is longer.

Limited 1 Year Warranty

The following parts of the wood burning stove are warranted to be free 
of defects in material and workmanship for a period of one year from 
the date you receive it:  The thermostat assembly, handles, glass door 
panels, cement, and gasketing.  Any of these items found to be defective 
will be repaired or replaced at no charge, upon the return of the part with 
postage prepaid to a Vermont Castings Authorized Dealer.
Any part repaired or replaced during the limited warranty period will 
be warranted under the terms of the limited warranty for a period not 
to exceed the remaining term of the original limited warranty or six (6) 
months, whichever is longer.

Limited Catalyst Warranty

The catalyst will be warranted for a six year period as follows:  If the 
original catalyst or a replacement catalyst proves defective or ceases to 
maintain 70% of its particulate emission reduction activity (as measured 
by an approved testing procedure) within 24 months from the date the 
stove is received, the catalyst itself will be replaced free.  
From 25 - 72 months a pro-rated credit will be allowed against a replace-
ment catalyst and the cost of labor necessary for its installation at the 
time of replacement.
For stove purchases made after June 30, 1990, a third year 
(25 - 36 months) of no charge replacement will be made when combus-
tor failure is due to thermal degradation of the substrate (crumbling of 
ceramic material).  The customer must pay for any in-home travel fees, 
service charges, or transportation costs for returning the stove to the 
Authorized Dealer.
 

Amount of Time 

Credit Towards 

 

Since Purchase 

Replacement Cost

 

0 - 24 months 

100%

 

25 - 36 months 

  50 %

 

37 - 48 months 

  30%

 

49 - 60 months 

  20%

 

61 - 72 months 

  10%

Any replacement catalyst will be warranted under the terms of the catalyst 
warranty for the remaining term of the original warranty.  The purchaser 
must provide the following information in order to receive a replacement 
catalyst under the terms of this limited warranty:

1.  Name, address and telephone number.
2.  Proof of original purchase date.
3.  Date of failure of catalyst.
4.  Any relevant information or circumstances regarding determination 

of failure.

5.  In addition, the owner must return the failed catalyst.

Exclusions & Limitations

1.  This warranty is transferable; however, proof of original retail pur-

chase is required.

2.  This warranty does not cover misuse of the stove.  Misuse includes 

overfi ring which will result if the stove is used in such a manner as 
to cause one or more of the plates to glow red.  Overfi ring can be 
identifi ed later by warped plates and areas where the paint pigment 
has burned off.  Overfi ring in enamel fi replaces is identifi ed by bub-
bling, cracking, chipping and discoloration of the porcelain enamel 
fi nish.  Vermont Castings Group offers no warranty on chipping of 
enamel surfaces. Inspect your wood burning stove prior to accepting 
it for any damage to the enamel.

3.  This warranty does not cover misuse of the stove as described in the 

Owner’s Guide, nor does it cover an stove which has been modifi ed 
unless authorized by a Vermont Castings Group representative in 
writing.  This warranty does not cover damage to the stove caused 
by burning salt saturated wood, chemically treated wood, or any fuel 
not recommended in the Owner’s Guide.

4.  This warranty does not cover a stove repaired by someone other 

than a Vermont Castings Authorized Dealer.

5.  Damage to the unit while in transit is not covered by this warranty but 

is subject to a claim against the common carrier.  Contact Vermont 
Castings Authorized Dealer from whom you purchased your stove or 
Vermont Castings Group if the purchase was direct.  (Do not operate 
the stove as this may negate the ability to process the claim with the 
carrier.)

6.  Claims are not valid where the installation does not conform to local 

building and fi re codes or, in their absence, to the recommendations 
in our Owner’s Guide.

7.  The salt air environment of coastal areas, or a high-humidity en-

vironment, can be corrosive to the porcelain enamel fi nish. These 
conditions can cause rusting of the  cast iron beneath the porcelain 
enamel fi nish, which will cause the porcelain enamel fi nish to fl ake 
off. This warranty does not cover damage caused by a salt air or 
high-humidity environment. 

8.  Vermont Castings Group shall have no obligation to enhance or 

update any unit once manufactured.

IN NO EVENT SHALL Vermont Castings Group BE LIABLE FOR 
INCIDENTAL AND CONSEQUENTIAL DAMAGES. ALL IMPLIED 
WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MER-
CHANTABILITY AND FITNESS, ARE LIMITED TO THE DURATION OF 
THIS WRITTEN WARRANTY. THIS WARRANTY SUPERCEDES ALL 
OTHER ORAL OR WRITTEN WARRANTIES.
Some states do not allow the exclusion or limitations of incidential and 
consequential damages or limitations on how long an implied warranty 
lasts, so the above limitations may not apply to you. This warranty gives 
you specifi c rights and you may have other rights which vary from state 
to state.

How to Obtain Service

If a defect is noted within the warranty period, the customer should contact 
a Vermont Castings Authorized Dealer or Vermont Castings Group if the 
purchase was direct with the following information:

1.  Name, address, and telephone number of the purchaser.
2.   Date of purchase.
3.   Serial number from the label on the back.
4.   Nature of the defect or damage.
5.  Any relevant information or circumstances, e.g., installation, 

mode of operation when defect was noted.

A warranty claim will then start in process.  Vermont Castings Group 
reserves the right to withhold fi nal approval of a warranty claim pending 
a visual inspection of the defect by authorized representatives.

Содержание 2040ce































Отзывы: