Vermona DRM1 MKIII, Руководство пользователя

Страница: 6 / 24

Setup
Scope of delivery
To ensure top quality, we carefully inspected the DRM1 MKIII before packaging. Nevertheless, the
unit could have been damaged during transportation. Therefore, we ask you to take a serious look at
the DRM1 MKIII when unpacking. Do not hesitate to contact us, should there be anything unusual
with the unit or its packaging.
You should find the following items in the box:
- the DRM1 MKIII
- a power chord
- this manual
- a big portion of fun
Connection and Startup
The DRM1 MKIII is a pure sound module. For reasonable use, it needs to be connected to a sequencer,
a computer or keyboard as well as to a mixing desk or an amplifier. After connecting the module to
a power socket using the supplied power chord, setup the audio- and MIDI-connections as follows:
Setting up audio connections
⚠
CONNECT FIRST, AND THEN SWITCH ON! To protect your speakers, your audio-
interface and, last but not least, your ears, we urgently recommend setting up
all cable connections while the equipment is switched off. Do not underestimate
level peaks and resulting possible damage that could occur when plugging in or
removing audio cables.
1. The jacks
OUT RIGHT
and
OUT LEFT
⑨
on the module‘s rear output all signals in stereo.
Connect these jacks to two line-inputs of a mixing desk, a computer-audio-interface or to
an amplifier using two 6.3 mm cables (TS). Alternatively or in parallel, you may connect
headphones to the
PHONES
jack
⑦
on the front panel.
5 User Guide DRM1 MKIII
EN