manualshive.com logo in svg

Vermeer S450TX, Быстрый старт


Поделиться
Скачать
background image

S450TX Mini Skid Steer 

Transporting the Machine 30-1

Section 30: Transporting the Machine

L

OADING

/U

NLOADING

 

THE

 M

ACHINE

•

Read the towing vehicle and trailer manuals for safety precautions and information.

•

Ensure gross weight of the machine with attachments is within the weight limits of the trailer and towing 
vehicle.

•

Properly attach trailer to towing vehicle and chock wheels or engage park brake of towing vehicle.

•

Ensure you are qualified to operate the machine. Refer to “Operator Qualifications,” 

page 40-1.

•

Keep attachment(s) as low as practical while loading and unloading.

•

Slowly drive machine on and off trailer squarely to minimize steering.

•

Do not attempt to steer machine when balanced at trailer/ramp transition.

•

Position machine at location for tie-downs and weight distribution as recommended by trailer 
manufacturer.

See “Machine Specifications” in the 

Maintenance Manual

 for tractor weights.

WARNING: 

Unintended machine movement may occur when loading or unloading on slippery, 

dirty or uneven trailer surfaces. Death or serious injury can result if struck or crushed by 
machine. Ensure trailer is level and all loading surfaces are clean and free of debris. Do not 
attempt to load onto slippery trailer surfaces. Use smooth and controlled steering movements.

Содержание S450TX





































































































Отзывы:

Нет отзывов

Похожие инструкции для S450TX

Бренды по названию

Популярные бренды

Загрузить еще бренды