manualshive.com logo in svg

Vermeer McLaughlin V25, Руководство оператора и по техническому обслуживанию

Поделиться
Скачать
Vermeer McLaughlin V25 Скачать руководство пользователя страница 61

V25/VX30G/VSK25/VSK30G Vacuum Excavators 

 Transporting the Machine   30-11

Installation

Lift vacuum excavator into position with suitable lifting equipment. Securely bolt vacuum excavator skid to the 
transport vehicle. 

NOTICE: 

Lift vacuum excavator with tanks empty. Attempting to lift with tanks full may damage the mounting 

cradle and require lifting equipment with larger capacity.

Locate vacuum excavator so the engine and controls can be easily accessed. Workers using the vacuum 
excavator will need safe and easy access to the controls, tools, and spoil tank. Provide steps or a ladder from the 
ground level to the bed of the truck or trailer.

WARNING: 

Before mounting on a truck or trailer, read the truck or trailer manual for safety 

precautions and information. Do not cut or drill any holes in the transport vehicle floor or frame 
without consulting a manual for the specific transport vehicle. Take protective measures and use 
caution when cutting or drilling around air and fuel tanks, hoses, and other nearby components.

Содержание McLaughlin V25























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды