LV65 Indoor/Outdoor Receiver User Guide
Proprietary & Confidential Statement: This document and the information disclosed within, including the document structure and
contents, are confidential and the proprietary property of Verizon and are protected by patent, copyright and other proprietary
rights. Any disclosure to a third party in whole or in part in any manner is expressly prohibited without the prior written permission
of Verizon.
27
2.9
Outdoor Installation (Wall Mounting)
Step 1. Signal scanning
Hold the Verizon Receiver next to different locations on the wall to perform signal scanning (hold the
device at a height above your head when doing so). Once a location with good signal strength is
found, the LED on the device will turn solid white. Affix a location sticker to the spot.
Note: When installed in an outdoor location, the device must be installed at a height above your head
to prevent people from standing directly in front of the device and in the line of sight between the
device and the 5G base station.
Step 2. Mark the screw locations
Place the outdoor bracket on the location on the wall where you want to install the device, then use a
marker to mark the locations where the screws will be drilled into the wall.
