Verizon Jetpack - MiFi 7730L, Руководство пользователя

Страница: 104 / 130

99
4G LTE Network
The 4G LTE Network section has the following options:
•
Status
— Status of the network (Disabled, Not available, or Available).
•
Network operator
— The vendor that currently provides wireless access.
•
Signal strength
— Indicates the signal strength for LTE.
•
SNR
— A measure of signal quality; the higher the number the better the signal.
About Jetpack Diagnostics - 4G LTE Network
GSM/UMTS/HSPA Network
The GSM/UMTS/HSPA Network section has the following options:
•
Status
— Status of the network (Disabled, Not available, or Available).
•
Network operator
— The vendor that currently provides wireless access.
•
Technology
— The current technology in use for the GSM/WCDMA/HSPA network.
Possible values, from slowest to fastest are GPRS, EDGE, UMTS, HSDPA, HSUPA, HSPA+,
and HSPA+ DC.
•
PLMN ID
— The name and/or ID of the Public Land Mobile Network.
•
Cell ID
— .The value identifies the cell tower currently in use.
•
RSSI
— Indicates the RSSI for the GSM/UMTS/HSPA signal. RSSI is a measure of signal
strength in decibels, relative to one milliwatt.
•
Roaming
— Indicates if the current connection is a roaming connection.
3G Network (eHRPD/EVDO/1xRTT)
The 3G Network (eHRPD/EVDO/1xRTT) section has the following options:
•
Status
— Status of the network (Disabled, Not available, or Available).
•
Network operator
— The vendor that currently provides wireless access.
•
RSSI (1x)
— Indicates the RSSI for the 1xRTT signal.
•
RSSI (EVDO)
— Indicates the signal strength for the EVDO/eHRPD signal.
•
Technology
— The type of technology used to connect to the Internet.
•
Ec/Io
— A measure of how clean the signal is, and is a type of signal-to-noise ratio.
•
SID
— System identifier for the network.
•
Roaming
— Indicates if the current connection is a roaming connection.