![Verizon FSNO21VA Скачать руководство пользователя страница 27](http://html1.mh-extra.com/html/verizon/fsno21va/fsno21va_instructions-manual_1005081027.webp)
5.4.4 WAN Settings
>
Network
>
WAN
WAN Settings
allows you to assign Dynamic IP or Static IP for the connected WAN device.
Once you select Dynamic IP, the page will display Dynamic IP information. If Static IP is selected, you will have to manually
input the information in Static Setup.
In advanced setting, you may choose to get DNS address dynamically from ISP (Internet Service Providers or manually
input the Primary/Secondary DNS addresses if you choose Use the following Address.
About IP Passthrough:
You may use the toggle switch to enable or disable IP Passthrough function. If IP Passthrough is enabled, Wi-Fi, IPv6,
firewall and ALG will be off. The Wi-Fi, the IPv6, the firewall and the ALG setting pages will show IP Passthrough is on. It will
prioritize WAN connections over cellular if WAN is connected.
To enable Wi-Fi, IPv6, firewall, and ALG again and resume prioritizing cellular connection, IP Passthrough must be disabled.
setup.verizon.com/businessinternetgateway
27