VERITAS 5350, Руководство по установке оборудования

Страница: 92 / 120

Installation instructions
The procedures for installing an Expansion shelf and inserting the disk drive carriers
are the same as for a Primary shelf.
The installation instructions are the same for NetBackup and Flex appliances.
Refer to the following sections for details.
See “Dimensions and determining rack locations” on page 23.
See “Installing a storage shelf” on page 30.
See “Installing disk drives and blanks into a half-capacity storage shelf” on page 43.
See “Installing disk drives into a full-capacity storage shelf” on page 40.
Connecting one Expansion Shelf to the Primary
Shelf
The Expansion Shelf connects to the Primary Shelf but it does not connect directly
to the compute node.
To connect one Expansion Shelf to the Primary Shelf
1
Verify that all compute nodes and the Primary Shelf are off and that the power
cords are unplugged.
Do not remove the cables between the compute nodes and the Primary Shelf.
2
Obtain the two SAS-3 cables that ship with the Expansion Shelf.
3
Identify the single SAS-3 port on the left side of each controller module in the
Primary Shelf.
92 Adding Expansion Storage Shelves to an operating appliance that does not have any Expansion shelves
Installation instructions