VERITAS 5250, Руководство по установке оборудования

Страница: 33 / 151

To attach the storage shelf bezel
1
Remove the bezel from its packaging.
Note: Ensure the end caps that cover the storage shelf control panel on the
left and the blank panel on the right are not installed. The bezel cannot be
attached if the end caps are installed on the panels.
2 With the front of the storage shelf bezel facing you, place the bezel over the
front panel of the storage shelf.
The bezel should cover the left control panel assembly and the right panel
assembly.
3 With the bezel in position, gently press it onto the front panel of the storage
shelf.
The bezel is fully seated and correctly installed when it snaps into place on the
front panel of the storage shelf.
Installing the appliance rack rails
Use the following procedure to install the rack rails. Ensure that the best practises
for installing the rack rails are followed.
See “Best practices for rack installation” on page 23.
33 Installation procedures
Installing the appliance rack rails