background image

Z207937-0E 

Page 1 of 8 

©2021 Veris Industries   USA 800.354.8556 or +1.503.598.4564  / [email protected] 0421 

 

Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of  Veris Industries, L.L.C. in the USA and/or other countries.

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

NOTICE

•  This product is not intended for life or safety applications.

•  Do not install this product in hazardous or classified locations.

•  Read and understand the instructions before installing this product.

•  Turn off all power supplying equipment before working on it.

•  The installer is responsible for conformance to all applicable codes.

If this product is used in a manner not specified by the manufacturer, the protection 

provided by the product may be impaired. No responsibility is assumed by the 

manufacturer for any consequences arising out of the use of this material.

Installation Guide

Temperature

Product Identification

Product Overview

The TW2 Series of temperature sensors for living space is a versatile sensor platform for use with BAS controllers 
designed to accept 4 to 20mA, 0 to 5Vdc or 0 to 10Vdc outputs. TW2 Series sensors are available with three user 
interface options: touchscreen, LCD with three buttons and blank. 

TW2 Series

Wall Mount Temperature Sensors

Specifications

OPERATING ENVIRONMENT

Input Power

Class 2; 20 to 30 Vdc, 24 Vac, 50 to 60 Hz

Analog Output

Selectable 4 to 20 mA, 0 to 5 V, 0 to 10 V

Operating Temp. Range

0 to 50 °C (32 to 122 °F)

Operating Humidity Range

0 to 95% RH non-condensing

Housing Material

High-impact ABS plastic

Terminal Block Torque

0.5 to 0.6 N-m (0.37 to 0.44 in-lbf)

IP Rating

IP 30

TEMPERATURE TRANSMITTER OPTION

Sensor Type

Solid state, integrated circuit

Accuracy

±0.2 °C (±0.4 °F) typical

Resolution

0.1 °C (0.1 °F)

Range

0 to 50 °C (32 to 122 °F)

DISPLAY MODELS

Touchscreen

61 mm (2.4 in), color, backlit, capacitive, 240x300 px 
Setpoint: 0-10Vdc. Temperature or fan speed selectable 
Timeout override: Display timeout* 
Lockout override: Touchscreen/button lockout*

LCD

52mm (2.05 in), segmented with 3 buttons 
Setpoint: 0-10Vdc. Temperature or fan speed selectable 
Timeout override: Display timeout* 
Lockout override: Touchscreen/button lockout*

TW2

User Interface

Output

Temperature

T  = Color touchscreen
L  = 3-button LCD display
X  = None

A  = Analog output

A  = Transmitter only
C  = 1000 PT RTD
D  = 10K T2 thermistor
H  = 10K T3 thermistor
K  = 10K curve G/11K shunt
M  = 20K NTC thermistor
N  = 1.8K TAC thermistor

TW2TAXx

TW2LAXx

TW2XAXx

X

Содержание TW2 Protocol Series









Отзывы: