Setting the Periodical Event
► To set Periodical Event
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click
System > Events > Periodical Event
.
4. Select
On
or
Off
.
5. In the
Minimum interval
box, type the minimal time interval in seconds.
6. From the
Triggered Action
section, select the alarm actions to perform.
Choose from the following:
Trigger Action
Perform the following
Upload image by
FTP
1. From the
FTP Address
list, select the FTP site.
2. From
Pre-trigger buffer
list, select the number
of frames.
3. From the
Post-trigger buffer
list, select the
number of frames.
Upload image by E-
mail
1. From the
E-mail Address
list, select the e-mail
address.
2. From
Pre-trigger buffer
list, select the number
of frames.
3. From the
Post-trigger buffer
list, select the
number of frames.
7. From the File Name section, set the properties of the image file.
8. In the File name box, type a name for the image.
9. Select one of the following:
Add date/time suffix.
Add sequence number suffix (no maximum value).
Add sequence number suffix up to and then start over.
Overwrite.
10. Click
Save
.
Chapter 4: Advance Configuration
© 2014 Verint Systems Inc. All Rights Reserved Worldwide.
48
