Verint Nextiva S4200-2V-BZ, Руководство пользователя

Страница: 99 / 152

Verint Video Intelligence Solutions 93
Nextiva S4200 Series User Guide
Manipulating the PTZ Camera
The PTZ controls that accompany live video allow you to manage the movements of the
connected PTZ camera and to specify zoom values. The available commands vary
depending on the PTZ protocol.
To manipulate the PTZ camera:
1. Ensure that the HTTP PTZ Controls parameter is enabled in the HTTP (Webserver) pane;
for more information, see page 89.
2. Ensure that the serial connection between the device and camera is properly
established.
3. In the Live Video Streaming pane, select one of the two viewing methods (Embedded
Video Window in the illustration). The PTZ controls appear.
4. In the protocol list , select the PTZ protocol used by the camera. Available
protocols are: PelcoP, Kalatel, PelcoD, Infinova, and Vicon.
5. To pan (left or right) or tilt (up or down) the camera, click the desired pan/tilt controls
.
6. To zoom in, click the + button ; to zoom out, click the - button.
7. To specify the pan/tilt speed, enter a value in the Speed box .
8. If the PTZ camera is automated, perform the following preset functions. A preset is a
camera angle that you can quickly select:
†
To save the current position of the PTZ camera, enter a number in the Preset box
, then click Store Preset .
†
To use a previously stored preset, enter a number in the Preset box, then click Go
to Preset .
PTZ controls